How to Use CloneCut

CloneCut takes three inputs — a reference clip, one image, and a sentence — and hands back the same clip with your subject inside it. This walkthrough covers the four decisions that decide whether your first render comes back clean.

New here? Start with how CloneCut works for the one-minute version.

  • Reference clip

  • Image

  • Sentence

What to Have Ready Before Your First Render

There is nothing to install. The whole workflow runs in the browser, and a first pass usually takes less time than choosing the clip. Line up five things first:

  • A reference clip — MP4, MOV or WebM.
  • One still image — JPG, PNG or WebP.
  • One sentence: what to replace, and what has to stay.
  • An account with credits loaded — a plan or a credit pack.
  • A rough idea of where the result goes: 9:16 vertical, 1:1, or 16:9.

If you are still deciding how much to commit, CloneCut plans and credit packs explains the difference between the two.

Step 1 — Load a Reference Clip the Model Can Read

The reference clip is where everything CloneCut copies comes from: the camera move, the cuts, the rhythm, the transformation itself. It is also the most common reason a render succeeds or fails. Load it before the image, so the model reads the motion before it meets your subject.

What a reference clip should look like

  • One subject, on screen for most of the runtime.
  • Three to twenty seconds. Twenty seconds is the ceiling.
  • Steady or slow camera, even light, clean colour.
  • One readable effect — one move, one transformation, one payoff.

Drop a clip here

MP4 · MOV · WebM

Good reference clip frame: one man in an olive jacket walking slowly toward the camera along a quiet park path
One subject, on screen for most of the runtime.
Hard reference clip frame: three friends overlapping in frame on a park lawn, arms crossing in front of each other
Three or more people in frame
Hard reference clip frame: a woman talking in a kitchen, the frame covered by large burned-in caption bars and stickers
Heavy captions burned into the footage

Clips that fight the model

Three or more people in frame, handheld shake, heavy captions burned into the footage, or a clip that only shows the effect for half a second. Trim those before upload instead of hoping the render recovers them. If you want to see what clean inputs turn into, the CloneCut examples page pairs each output with the clip it came from.

Step 2 — Add the Image That Replaces the Subject

One image, not a folder. This is the picture the model rebuilds your subject from, so framing matters more than resolution: a sharp 1200px photo reliably beats a soft 4K one.

Framing rules that carry over

  • Match the angle — a three-quarter view in the photo against a three-quarter view in the clip.
  • Keep the backdrop plain; clutter in the photo turns into artefacts on screen.
  • Match the light direction, or the subject looks pasted in.
  • Products: one object, centred, plain backdrop, no price tags.
Product photo with a matching angle: a white pump bottle with a wooden collar seen from a three-quarter front view
Match the angle — a three-quarter view in the photo against a three-quarter view in the clip.
Product photo with a mismatched angle: the same white pump bottle photographed flat from directly overhead
The photo angle did not match the clip.

Step 3 — Describe the Change in One Sentence

Write it in two halves: replace this, keep that. Name the subject, point at the image, and list what must survive — camera move, cuts, timing, on-screen text. One sentence is usually enough; three paragraphs of direction tends to confuse the render more than it helps.

"Make it look better."

"Replace the person on the left with the person in my image. Keep the camera push-in, the two cuts and the timing."

"Change the product."

"Replace the bottle on the table with the bottle in my image. Keep the hand movement and the table."

"Use my photo."

"Replace the main subject with the figure in my image. Keep the walk, the doorway and the on-screen text."

Not sure which parts of a clip are even copyable? What CloneCut is — and what it is not draws that line in one page.

Output Settings, Explained

Pick the lowest resolution that clears the bar for where the video is going — every platform re-encodes what you upload, and a clean 720p often survives compression better than a noisy 1080p.

480p

What you get
Fastest render, lowest credit cost
When to pick it
Drafts and A/B tests

720p

What you get
Balanced — the default choice
When to pick it
Most short-form feeds

1080p

What you get
Sharpest output, slowest render
When to pick it
Paid placements, large screens

Length

What you get
Up to 20 seconds per video
When to pick it
Match the platform's cut, not the ceiling

Watermark

What you get
None on every plan
When to pick it
Anywhere the clip represents your brand

Credits

What you get
Cost is shown before you confirm
When to pick it
Failed runs return the credits spent

Credit pricing lives on one page so it never drifts out of sync — see CloneCut plans and credit packs.

What Happens Between Render and Download

You see the credit quote before anything runs, so there is no surprise on the bill. Confirm, and the job moves through queued → rendering → preview. When it finishes you preview in the browser and download the file; if the system confirms a failure, the credits spent on that task come back to your balance. Nothing is charged twice for the same run.

Credit quote

Confirm
  1. Queued
  2. Rendering
  3. Preview ready

Five Results That Come Back Wrong — and the Fix

Almost every bad render has one of five causes. Change one input at a time; changing three at once tells you nothing about which one fixed it.

  • 1. The face drifts halfway through the clip

    The subject was partly hidden or turned away. Use a reference clip where the subject is visible most of the runtime, and expect the weakest result from profile shots.

  • 2. The motion stutters where the clip cuts

    The reference had several cuts in a short span. Trim to one continuous shot and rebuild.

  • 3. The product changes shape between frames

    The photo angle did not match the clip. Re-shoot or regenerate the image from the same angle the camera sees.

  • 4. Two people merge into one

    The clip has more than one subject and the instruction named neither. Name the subject explicitly.

  • 5. The output looks soft

    Low-light or heavily compressed source footage. Render at a higher resolution, or start from a cleaner clip — upscaling a bad source just enlarges the softness.

A Faster Way to Compare Versions

Keep the reference clip and the sentence identical; change only the image. Two renders made that way tell you which photo works. Change the clip as well and you are comparing two effects, not two inputs — that is a slower way to learn anything. The CloneCut examples page is organised so you can see the same clip with different subjects side by side.

After the Render — Export and Publish

Download the file, and add audio in your editor if the platform expects a specific track — CloneCut rebuilds the picture, not the soundtrack. Two habits keep you out of trouble: only use footage and images you own or are licensed to use, and label the output as AI-edited wherever the platform or local law asks for it. Those rules are part of the terms, not optional advice.

Frequently Asked Questions

What files does CloneCut accept?

Footage as MP4, MOV or WebM, and stills as JPG, PNG or WebP. The editor shows the size and length limits that apply to your account before you upload, so check there rather than guessing.

Do I need editing skills to use CloneCut?

No. There is no timeline, no keyframes and no mask tool — the inputs are a clip, an image and a sentence. You will get better results faster if you can look at a clip and say what makes it work, but that is a skill in watching, not in editing.

How long should my reference clip be?

Three to twenty seconds is the sweet spot, and twenty seconds is the ceiling. Short clips also cost less in credits, which makes them the cheaper way to test an idea before committing to a longer render.

What happens if a render fails, or comes back wrong?

If the system confirms the generation failed, the credits spent on that task are returned. A result that renders but looks wrong is a different case: keep the clip, change one input, and render again — the five fixes above cover most of it.

Can I run the same clip with several images?

Yes, and that is the fastest way to find the right subject. Hold the clip and the sentence fixed and only change the image, so the comparison is fair.

Can I choose the resolution, and will there be a watermark?

Output is available in 480p, 720p and 1080p, and every plan renders without a watermark. The credit quote before you confirm reflects the resolution and length you picked.

Give CloneCut a clip and one image

The first render answers the only question that matters — whether CloneCut reads your reference the way you do.

Or see what other people got from the same workflow → CloneCut examples